Peristaltic Filling Machine

This easy to use table-top filling system is ideally suited for small volume fills of high value, aqueous or light viscosity products like pharmaceutical preparations, perfumes and fragrances, reagents, essential oils, inks, dyes, thin paint and specialty chemicals. It is easy to use and quick to change over products with no risk for cross contamination. This system can be easily be upgraded to as many as 24 Channels (4 dual pump heads). A variety of tubing materials and sizes are available to match your specific product and budgets. In many cases, very inexpensive tubing can be used and then discarded, saving costly clean-up time. And the system pumps most products directly from your bulk tank, eliminating transfer of product from one tank to another.

Technical Features:

  • Variable-speed Digital Drive, 10-600 rpm (other drives are available including fixed speed and hazardous environment applications)
  • Flow rate from 0.6 to 3400 ml per minute, depending on drive rpm, tubing size and product viscosity
  • Maintenance free, brushless, reversible motor with precise speed control
  • Membrane keypad for easy programming, lock/unlock feature prevents accidents & tampering
  • Dispense Interval Mode lets you set time delay between dispense cycles from 1-9999 seconds
  • Includes one (1) twin channel Pump Head, tool-less design for fast tube loading/unloading
  • Foot Pedal start control for single fill cycle activation
  • 115/230VAC dual voltage, uses 1.5 Amps at 115VAC, or 0.8 Amps at 230VAC
  • Includes 1 bench-top tubing cutter and 2 replacement blades
  • Tubing, Nozzles, additional Pump Heads and other accessories sold separately


Filling mouth

Note material mouth


AIRTAC Thin Cylinder

AIRTAC Magnetic Switch

STNC solenoid valve
Applicable products


1. the use of stainless steel roller materials.
2. the Press and head Ontology can be separated, loaded card hose convenience, according to user needs, rods over head, pleasing in appearance, sophisticated, compact structure, flow broad.
3. convenient way matching OEM applications. With regular features to achieve semi-automatic distribution, filling a semi-current lockout.
4. this is not the filling machine contact with the materials. Particularly applicable to biological agents, eye fluid, Liquid, sulfuric acid, hydrochloric acid, 84-corrosive disinfection liquid, and other products

More Filling Machine Products
Ointment Filling Machine
Ointment Filling Machines

Nozzle Selections

Tank Options
Gas source choice
The Semi Automatic Servo PD Filler can draw from many sources including
its own hopper, external sanitary hoppers or kettles, and direct from drum.
Air compressor
Air pressure :0.4-0.6MPa
Watch this Product Video Accessories Catalog Download Manual
Download Manual Download Manual More About Overflow Fillers